Rendering Plant Effluent Treatment System

Rendering Plant Effluent Treatment System

The Rendering Plant Effluent Treatment System treats fats, suspended solids and organic pollutants in wastewater from animal rendering and equipment cleaning. It uses the SYQFJ 05 flotation unit for front-end separation, followed by the SYWSX 03 integrated treatment unit. Dissolved air flotation removes part of the fats and suspended matter, helping reduce the risk of downstream blockage and sediment buildup.
Send Inquiry
Description

Two-Stage Treatment for Oily Effluent

 

The Rendering Plant Effluent Treatment System treats fats, suspended solids and organic pollutants in wastewater from animal rendering and equipment cleaning. It uses the SYQFJ 05 flotation unit for front-end separation, followed by the SYWSX 03 integrated treatment unit. Dissolved air flotation removes part of the fats and suspended matter, helping reduce the risk of downstream blockage and sediment buildup.

 

The two defined equipment models allow buyers to check the system composition against the intended two-stage treatment sequence. The Rendering Plant Effluent Treatment System is suited to rendering plants, dead-animal treatment centers and animal by-product processing facilities, and can also be used to upgrade an existing rendering-workshop wastewater system.

 

Adapt Treatment to Influent Conditions

 

The system is intended for wastewater with fats and high suspended-solids content. The effluent objective is configured according to local discharge requirements. If influent quality fluctuates or additional treatment is needed, equalization, sedimentation or advanced-treatment units can be considered based on pollutant concentrations.

 

During selection, buyers can confirm existing wastewater volume, the flotation-unit outlet interface and the downstream treatment method. Reviewing these points helps clarify the placement of the SYQFJ 05 and SYWSX 03 units and their connections.

 

Fabrication, Inspection and Project Timing

 

Zhejiang Shengsheng Environmental Protection Technology Co., Ltd. manufactures wastewater and related environmental-treatment equipment. The factory has plate rolling, bending, laser welding and pressure-testing equipment for structural fabrication and inspection. Site drawings can be used to check equipment arrangement and connections. Before packing, 100% inspection can be arranged. The stated production period for a complete equipment set is three months; installation and commissioning can also be discussed.

 

Product Specifications

 

Parameter

Specification

Flotation unit model

SYQFJ 05

Integrated treatment unit model

SYWSX 03

Pretreatment method

Dissolved air flotation

Main wastewater type

Oily wastewater with high suspended-solids content

Effluent objective

Configured according to local discharge requirements

 

Hot Tags: rendering plant effluent treatment system, China rendering plant effluent treatment system manufacturers, suppliers, factory, Industrial Biological Wastewater Treatment System, Livestock Farm Wastewater Treatment Equipment, Meat Processing Wastewater Treatment Equipment, Poultry Processing Wastewater Treatment System, Rendering Plant Effluent Treatment System, Slaughterhouse Wastewater Treatment Equipment

Send Inquiry