This is the heart of the entire refining process, primarily involving heating to break down fat cells and release liquid oil. Depending on the heating method and environment, it can be mainly divided into dry melting and wet melting.
*Dry Melting: Indirect heating of pre-treated raw materials in the absence of water or with only a small amount of water. The heating process requires precise control of temperature and time, typically maintaining a temperature sufficient to melt the fat without causing excessive decomposition or unpleasant flavors. Under heating and slow stirring, the fat cell walls are broken down, and the oil gradually separates. Oils obtained using this method usually have a richer flavor.
*Wet Melting: Heating with hot water or directly introducing steam. The heat from the water or steam melts the fat, and the presence of the aqueous phase helps dissolve some water-soluble impurities (such as proteins and sugars) and makes it easier to separate the melted oil from solid residue (oil residue). Wet melting is sometimes considered to yield oils with a lighter color and less off-flavor.
Regardless of the method used, the resulting mixture is a mixture of fats, water (in the case of a wet process), and solid protein residue (often referred to as "oil cake" or "oil residue").


