Quality Assessment Of Incinerators For Diseased Animal Carcasses

Jul 19, 2026

Leave a message

Equipment Design

Archived The harmless incinerator for diseased animal carcasses employs a two-stage combustion process. The primary combustion chamber temperature is 600–800℃, and the secondary combustion chamber temperature is 800–1100℃, ensuring complete ash formation of combustibles and a volume reduction ratio ≥97%. The furnace heats up rapidly, consumes less fuel, and achieves complete combustion.

The flue gas residence time is ≥3 seconds, with an excess gas coefficient of 100%, utilizing a vortex combustion process.

A temperature control system is included, resulting in low operating costs. A heat exchanger is used for cooling, enabling resource recovery.

The harmless incinerator for diseased animal carcasses has a small footprint, is simple to operate, and is easy to maintain.

Design Basis
Suitable incinerators for: animal carcasses, animal excrement, etc.

Calorific value of incinerator for the harmless incineration of diseased animal carcasses: Mixed calorific value approximately 3500 kcal/kg or less. Ignition method: Automatic ignition. Auxiliary fuel: Diesel fuel (lower calorific value 10495 kcal/kg). Incinerator structure: Cylindrical. Primary combustion chamber temperature: ≥600-800℃. Secondary combustion chamber temperature: ≥900-1100℃. Primary combustion chamber flue gas outlet temperature: ≥850℃. Incinerator body surface temperature: ≤35℃. Residence time in the harmless incinerator: ≥3 seconds
Negative pressure in the furnace of the harmless incinerator for diseased animal carcasses: -3 Pa to -10 Pa
Hot ignition rate of the incineration residue in the harmless incinerator for diseased animal carcasses: >5%
Service life of the harmless incinerator for diseased animal carcasses: 15-20 years
The furnace body of the harmless incinerator for diseased animal carcasses is well sealed, and the feed furnace door adopts a sealed structure to prevent gas leakage.

5

Process flow of the harmless incinerator for diseased animal carcasses: Material is fed into the primary combustion chamber and ignited by an ignition temperature-controlled burner. Based on the three Ts of combustion (temperature, time, and vortex), the material undergoes complete oxidation, pyrolysis, and combustion in the primary combustion chamber. The flue gas produced after combustion enters the secondary combustion chamber for further high-temperature incineration, ensuring more complete combustion. Then, the flue gas enters a heat exchanger for cooling, followed by dust removal by a dust collector, and is discharged into the atmosphere through a chimney after meeting emission standards. The ash produced after combustion is manually removed and transferred for landfill.

Send Inquiry